UF (1-6) Port Manifold Series – 1/8′ BSP SS
Stainless steel distribution manifolds with 1 to 6 outlet ports, 1/8″ BSP threaded. Compact footprint for splitting a single inlet feed to multiple lubrication points. Mounting holes for direct fixing to plant or chassis.
| Types | 1 Port Manifold 90° WITH 1/8' BSP SS, 1 Port Manifold STR WITH 1/8' BSP SS, 2 Port Manifold 90° WITH 1/8' BSP SS, 2 Port Manifold STR WITH 1/8' BSP SS, 3 Port Manifold 90° WITH 1/8' BSP SS, 3 Port Manifold STR WITH 1/8' BSP SS, 4 Port Manifold 90° WITH 1/8' BSP SS, 4 Port Manifold STR WITH 1/8' BSP SS, 5 Port Manifold 90° WITH 1/8' BSP SS, 5 Port Manifold STR WITH 1/8' BSP SS, 6 Port Manifold 90° WITH 1/8' BSP SS, 6 Port Manifold STR WITH 1/8' BSP SS |
|---|
UF (1-6) Port Manifold Series – 1/8′ BSP SS
Stainless steel distribution manifolds with 1 to 6 outlet ports, 1/8″ BSP threaded. Compact footprint for splitting a single inlet feed to multiple lubrication points. Mounting holes for direct fixing to plant or chassis.
Compact stainless steel manifolds for splitting a single lubrication feed line into multiple downstream points — used wherever the centralised lubrication system needs to serve a cluster of bearings or pivots from a single inlet.
Configuration
- Outlet count: 1, 2, 3, 4, 5 or 6 ports
- Inlet: 1/8″ BSP female, located on one face
- Outlets: 1/8″ BSP female, evenly spaced
- Body: 316 stainless steel — corrosion-resistant for marine, food and outdoor use
- Mounting: through-holes for M5/M6 fixings
- Working pressure: 350 bar
When to specify
Use in place of multiple T-fittings and elbows when feeding a tight cluster of bearings — cleaner installation, fewer leak paths, easier servicing. Pair with metering valves at each outlet for precise dose control.
You may also need
-
3 variants
UF Nozzles
Spray and stream nozzles for grease and oil lubrication of open-gear, chain drive and conveyor applications. Range of…
-
4 variants
UF Swivels
High-pressure rotating swivel fittings for lubrication lines that cross articulating joints — slewing rings on excavators, articulated truck…
-
4 variants
3-5 Way Adaptor Fittings
Branching adaptor fittings with 3, 4 or 5 outlets from a single inlet. Compact alternative to a manifold…
-
3 variants
UF Angled Elbow Fittings
Compact 45° and 90° elbow fittings in stainless steel and mild steel — for routing lubrication tubing around…
