Tubing & Crimped Sleeves
High-pressure lubrication tubing in nylon, polyurethane and copper — supplied with matched crimped end-sleeves for leak-free, vibration-resistant connection to fittings. Specified per metre with sleeve count to suit installation drawing.
| Types | 8.4mm Polyamide Tube, 11.2mm Polyamide Tube, 6mm X 1,5mm Nylon Tube, 6mm X 1mm Stainless Steel Tube, 8mm X1mm Stainless Steel Tube, 10mm X 1mm Stainless Steel Tube, 1/4 Inch R1 Hose, Crimped sleeve for 8.4MM Hose with zerk MS - 200MM long, Crimped sleeve for 8.4MM Hose 6mm Standpipe MS - 200MM long, Crimped sleeve for 8.4MM Hose with 7/16 swivel nut MS - 200MM long, Crimped sleeve for 8.4MM Hose with 8mm Standpipe MS - 200MM long |
|---|
Tubing & Crimped Sleeves
High-pressure lubrication tubing in nylon, polyurethane and copper — supplied with matched crimped end-sleeves for leak-free, vibration-resistant connection to fittings. Specified per metre with sleeve count to suit installation drawing.
The feeder lines of any centralised lubrication system. Ultra-Flow stocks the full range of tubing and crimped sleeves to suit Southern African industry — from low-pressure secondary feeders to high-pressure mains.
Tubing options
- Nylon (PA12): 4 mm, 6 mm and 8 mm OD — flexible, lightweight, oil-resistant. Working pressure to 100 bar.
- Polyurethane (PU): same OD range — better flexibility for tight bend radii. Working pressure to 60 bar.
- Copper: 6 mm, 8 mm and 10 mm OD — for high-pressure mains or applications requiring rigid routing. Working pressure to 350 bar with annealed sleeve crimps.
Crimped sleeves
Each tube is supplied with matched crimped end-sleeves — these provide the gas-tight, vibration-resistant seal at the fitting, far more reliable than bite-type or compression-only fittings on a pulsating lubrication line. Specify per metre of tube with sleeve count to match your installation drawing.